Skip to content
ADM & Partners
News & insights
Government schemes

Is BICS only for heavy industry? No. Here's how to check before 30th November

Adam Elder · · 4 min read

Illustration of a factory, an electricity bill with a downward arrow and a calendar

When people hear about the British Industrial Competitiveness Scheme (BICS), many picture steelworks, chemical plants and glassmakers. Plenty of smaller manufacturers assume it isn't for them and never look. That can be an expensive assumption, and there isn't long left to check: applications close at 11:59pm on 30th November 2026.

What BICS does

BICS reduces some of the policy costs that sit on business electricity bills. For eligible manufacturing sites, the government guidance says:

  • from April 2027, the site stops paying the indirect costs of the Renewables Obligation (RO) and Feed-in Tariffs (FiT)
  • from October 2027, the site also stops paying the indirect costs of the Capacity Market (CM)

These are charges every business pays through its electricity bill, whatever its size. So the relief isn't limited to the biggest energy users.

Who can qualify

The test isn't how big your business is. It's what you make and how much grid electricity your site uses. In simple terms, a site needs to:

1. carry out an eligible manufacturing activity, identified by its SIC code (the activity code your business is registered with) 2. make products that fall within the eligible product codes (known as HS codes) 3. use at least 33 MWh of grid electricity a year at that site

If you make things and run machinery, ovens, compressors or chillers, it's worth checking your bills against that figure.

The first two checks you can do today

You don't need to be an expert to make a start. Two quick checks will tell you whether it's worth going further.

Check your SIC code. You'll find it on your company's Companies House record. Compare it with the list of eligible codes in the GOV.UK guidance.

Check your annual electricity use. Look at your last twelve months of electricity bills for the site and add up the kWh. 33 MWh is 33,000 kWh. If your site uses more than that, keep going. The application asks for evidence from six consecutive months within the last twelve, so it helps to have those bills to hand.

The government also has an official BICS eligibility checker. It takes a few minutes and gives you an initial indication. It isn't a final decision.

Then get a proper eligibility check

If those first checks look promising, the next step is a fuller check of your product codes and how much of the site's electricity goes on eligible manufacturing. This matters on sites that make a mix of products, because relief is pro-rated: according to the guidance, if 25% or less of the electricity is used for eligible manufacturing there's no relief, above 25% there's half relief, and at 50% or more there's full relief. A site that only makes eligible products can get full relief, subject to verification.

This part is best done with an accountant or adviser who knows the scheme, because matching products to HS codes needs care and the evidence has to stand up.

If you're already on the Supercharger

Energy-intensive businesses may already get support through the British Industry Supercharger. You can still apply for BICS, but the guidance is clear that you can't get relief twice for the same activity. BICS only applies to electricity that isn't already covered. If your business is very energy-intensive and you haven't looked at the Supercharger, that's worth checking too.

Don't leave it too late

Applications close at 11:59pm on 30th November 2026. Gathering bills and checking codes can take a while, so it's worth starting now rather than in the final week.

Everything above is based on the GOV.UK guidance for applicants, updated 13th November 2026.

If you'd like a second pair of eyes on the first checks, drop me a message and I'll take a look with you, free and with no obligation. Where it looks promising, I can point you to an accountant who knows the scheme for the full eligibility check.

Get in touch at hello@admpartners.uk or call 0333 321 8348.

Adam Elder is a Director at ADM & Partners, a commercial energy and sustainability advisory working with UK businesses.

Related reading

BICS eligibility: a plain-English guide to the British Industrial Competitiveness Scheme

  • BICS
  • Energy costs
  • Manufacturing
  • Grants and relief
  • Government schemes

Want to know what this means for your business?

Book a free energy review

Related articles